// *********************************************************************
// *                       E10 - RFMODE-RX                             *
// *                         RF receiver                               *
// *********************************************************************
// RF modes using.
// For more information about RF modes see IQRF OS Ref. Guide and User´s Guide.
//
// Example E10 consists of 2 programs:
//   - RFMODE-TX
//   - RFMODE-RX
//
// Intended for:
//   HW: - TR-72G + DK-EVAL-04x development kit
//
//   OS: - v4.06G
//
// Description:
//   This example shows how to use RF modes. It consists of 3 parts with
//   the same function but with different RX mode. Appropriate part can be
//   choosed using #define RX_MODE below. When the correct RF packet is
//   received the answer is sent back.
//
// ---------------------------------------------------------------------
// Online IQRF OS Reference Guide: https://doc.iqrf.org/IQRF-OS-Reference-guide
//
// Copyright (c) IQRF Tech s.r.o.
//
// File:    E10-RFMODE-RX.c
// Version: v3.00                                   Revision: 11/06/2021
//
// Revision history:
//   v3.00: 11/06/2021  First release for TR-7xG.
//
// *********************************************************************
// Default IQRF include (modify the path according to your setup)
#include "IQRF.h"

// *********************************************************************
#define XLP_MODE                        // set STD_MODE or LP_MODE or XLP_MODE
#define RX_FILTER               5
// *********************************************************************

#ifdef STD_MODE
void APPLICATION()
{
    pulseLEDG();
    setRFmode(_WPE | _RX_STD | _TX_STD);
    _checkRFcfg_PQT = 1;                // Enable preamble quality test
    toutRF = 1;                         // Wait Packed End active so the toutRF can be set to minimum

    while (1)
    {
        if (checkRF(RX_FILTER))
        {
            if (RFRXpacket())
            {
                if (bufferRF[0] != 'S')
                    continue;
                
                pulseLEDR();                
                bufferRF[1] = '_';
                bufferRF[2] = 'o';
                bufferRF[3] = 'k';
                PIN = 0;
                DLEN = 4;
                waitMS(5);              // Required min. delay before RFTXpacket.
                RFTXpacket();           // Send answer
            }
        }
    }
}

#elif defined LP_MODE
void APPLICATION()
{
    pulseLEDG();
    waitDelay(10);                      // Wait for end of LED flash
    setRFmode(_WPE | _RX_LP | _TX_STD); // LP RX mode - RFIC is periodicaly switched ON/OFF
    toutRF = 10;                        // [cycle], 1 cycle is cca 47ms
    checkRF(RX_FILTER);                 // To set internal filtering for LP receiving

    while (1)
    {
        if (RFRXpacket())
        {
            if (bufferRF[0] != 'L')
                continue;
            
            pulseLEDR();
            waitDelay(5);               // Wait for end of LED flash
            bufferRF[1] = '_';
            bufferRF[2] = 'o';
            bufferRF[3] = 'k';
            PIN = 0;
            DLEN = 4;
            RFTXpacket();               // Send answer
        }
    }
}

#elif defined XLP_MODE
void APPLICATION()
{
    pulseLEDG();
    waitDelay(10);                      // Wait for end of LED flash
    setRFmode(_WPE | _RX_XLP | _TX_STD);// XLP RX mode - RFIC is periodicaly switched ON/OFF
    toutRF = 10;                        // [cycle], 1 cycle is cca 790ms
    checkRF(RX_FILTER);                 // To set internal filtering for XLP receiving

    while (1)
    {
        if (RFRXpacket())
        {
            if (bufferRF[0] != 'X')
                continue;
            
            pulseLEDR();
            waitDelay(5);               // Wait for end of LED flash
            bufferRF[1] = '_';
            bufferRF[2] = 'o';
            bufferRF[3] = 'k';
            PIN = 0;
            DLEN = 4;
            RFTXpacket();               // Send answer
        }
    }
}

#else
    #error RF mode is not selected.
#endif
// *********************************************************************